Veritas Crosscut Tenon Saw, 12 TPI - Woodcraft 05T1405

Description

The rip saw has 9tpi with a 14° rake using the typical 60° included angle, set is the same as on the crosscut saw. The rip saw is optimised for the fast accurate cutting of tenon cheeks and similar cutting operations with the grain. The design of the hardwood wooden handle has been developed to give good power transfer while still allowing a three or four finger grip for precise control. Available in crosscut and rip cut versions, the crosscut being for trimming parts to length or for use with a mitre box. The crosscut saw has 12tpi with a 15° rake and an included angle of 60°, set is 0.06720mm per side. They combine the best characteristics of this fine classic joinery saw with those of state-of-the-art materials and construction methods. The unique designs of the Veritas carcass saws and dovetail saws have proved to be extremely popular and Veritas have now introduced two superb 400mm tenon saws to complement their range. They combine the characteristics of this fine classic joinery saw with those of state-of-the-art materials and construction methods. The teeth are filed at an alternating 75° angle to the blade, which creates a 15° bevel on each tooth. Available in crosscut and rip cut versions, the crosscut being excellent for trimming parts to length or for use with a mitre box. The tooth pattern on the thin high-carbon steel blades provide a good balance between cutting action and surface finish.

Key Features

• The unique designs of the Veritas carcass saws and dovetail saws have proved to be extremely popular and Veritas have now introduced two superb 400mm tenon saws to complement their range.
• Available in crosscut and rip cut versions, the crosscut being for trimming parts to length or for use with a mitre box.
• They combine the characteristics of this fine classic joinery saw with those of state-of-the-art materials and construction methods.
• The crosscut saw has 12tpi with a 15° rake and an included angle of 60°, set is 0.06720mm per side.
• The tooth pattern on the thin high-carbon steel blades provide a good balance between cutting action and surface finish.
• The design of the hardwood wooden handle has been developed to give good power transfer while still allowing a three or four finger grip for precise control.