Niagara Cutter 5/8

Description

Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. It also offers increased hardness for abrasion resistance and may reduce the need for lubricants based on the application. Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Four flutes produce a better finish than fewer flutes. The 30-degree helix angle supports general-purpose applications. The number of flutes can range from two to eight. The round shank accommodates a variety of holders. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. Two-flute designs offer the efficient chip removal, but more flutes provide a smoother finish. The Niagara Cutter C430 TiAlN-coated carbide square nose end mill has four flutes and a 30-degree helix angle for general-purpose machining on a range of materials. The TiAlN coating resists heat better than TiN and TiCN coatings, increasing tool life and performance. End mills are designed to remove material and create multi-dimensional shapes and profiles. The shank is the end of the tool held in place by a tool holder or machine. Cutting diameter tolerance is +0.000 to -0.002. It balances lower angles strong cutting edge for difficult-to-machine materials with higher angles increased cutting action. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit.

Key Features

• (TiAlN is suitable for a range of materials, but TiCN or uncoated end mills are recommended for machining aluminum.) The carbide substrate is harder than high-speed or cobalt steel, making it more wear resistant at high speeds and.
• The 30-degree helix angle supports general-purpose applications.
• The Niagara Cutter C430 TiAlN-coated carbide square nose end mill has four flutes and a 30-degree helix angle for general-purpose machining on a range of materials.
• They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter.
• Two-flute designs offer the efficient chip removal, but more flutes provide a smoother finish.
• End mills are designed to remove material and create multi-dimensional shapes and profiles.