Knape and Vogt P992 5 60 inch Long Sliding Cabinet Door Track - Zinc - Gray

Description

Ball bearing carrier has free moving balls set 3" on center. Tracks are made from zinc plated steel for durability. For best fit, glass should be cut 1-1/4" shorter than the height of the opening. Components can be cut to fit openings other than the pre-cut sizes. KV P992 RollEzy Ball Bearing Hardware kits for bypass glass doors include all tracks and rollers to make sliding glass doors for 3 foot to six foot wide openings: Designed for larger glass door installations used in retail display cases. Prepackaged assemblies for 36", 48", 60" and 72" openings. Allows heavy doors to slide easily. Knape and Vogt recommends that the height of the door should be no more than two times the door width. Tracks can be surface mounted or recessed into a routed channel. Tracks are made from zinc plated steel for durability. For fit, glass should be cut 1-1/4" shorter than the height of the opening. Complete kits make installation simple. Wide divider on upper channel maintains door position. Kits contain: 1ea Upper double channel, 2ea Shoe(to hold bottom ofglass), 2ea Ball Bearing Carriers and 1 lower double track. KV P992 RollEzy Ball Bearing Hardware kits for bypass glass doors include all tracks and rollers to make sliding glass doors for 3 foot to six foot wide openings: Designed for larger glass door installations used in retail display cases, trophy cases, and. For fit, glass should be cut 1-1/4" shorter than the height of the opening.

Key Features

• Kits contain: 1ea Upper double channel, 2ea Shoe(to hold bottom ofglass), 2ea Ball Bearing Carriers and 1 lower double track.
• Components can be cut to fit openings other than the pre-cut sizes.
• Allows heavy doors to slide easily.
• Tracks are made from zinc plated steel for durability.
• KV P992 RollEzy Ball Bearing Hardware kits for bypass glass doors include all tracks and rollers to make sliding glass doors for 3 foot to six foot wide openings: Designed for larger glass door installations used in retail display cases.
• For fit, glass should be cut 1-1/4" shorter than the height of the opening.