Asmc Industrial 1/2 x 1 1/2 Fender Washer Stainless Steel 316

Description

Part #: 0000-199427. PRODUCT SPECIFICATIONS Part #: 0000-199427 Fastener Type: Fender Washer Size Description: 1/2 x 1 1/2 Diameter/Nominal Size: 1/2* Inside Diameter: 0.531" Outside Diameter: 1.500" Thickness: 0.051-0.080" System of Measurement: Inch Material: Stainless Steel 316 Finish: Plain Finish (No Plating). Actual inside diameter is almost always larger than stated size. PRODUCT SPECIFICATIONS Part #: 0000-199427 Fastener Type: Fender Washer Size Description: 1/2 x 1 1/2 Diameter/Nominal Size: 1/2* Inside Diameter: 0.531" Outside Diameter: 1.500" Thickness: 0.051-0.080" System of Measurement: Inch. PRODUCT SPECIFICATIONS Part #: 0000-199427 Fastener Type: Fender Washer Size Description: 1/2 x 1 1/2 Diameter/Nominal Size: 1/2* Inside Diameter: 0.531" Outside Diameter: 1.500" Thickness: 0.051-0.080" System of Measurement: Inch Material: Stainless Steel. Washers are thin disk-shaped plates with a hole that is used to distribute the load of a threaded fastener such as a bolt or nut; often have an outer diameter (OD) about twice their inner diameter (ID), but this can vary based upon the washer. Discounts on larger quantities. Washers are thin disk-shaped plates with a hole that is used to distribute the load of a threaded fastener such as a bolt or nut; often have an outer diameter (OD) about twice their inner diameter (ID), but this can vary based upon the. Buy as few as 500 pcs. *Washer Sizing: Washer sizes are nominal (sized for the bolt that the washer will fit).

Key Features

• PRODUCT SPECIFICATIONS Part #: 0000-199427 Fastener Type: Fender Washer Size Description: 1/2 x 1 1/2 Diameter/Nominal Size: 1/2* Inside Diameter: 0.531" Outside Diameter: 1.500" Thickness: 0.051-0.080" System of Measurement: Inch.
• Part #: 0000-199427.
• Washers come in many different varieties; flat washers, split lock washers, toothed lock washers, beveled washers in both steel and iron, etc.
• Actual inside diameter is almost always larger than stated size.
• *Washer Sizing: Washer sizes are nominal (sized for the bolt that the washer will fit).
• Washers are thin disk-shaped plates with a hole that is used to distribute the load of a threaded fastener such as a bolt or nut; often have an outer diameter (OD) about twice their inner diameter (ID), but this can vary based upon the.